软路由的网络性能优化

本次性能优化基于 /etc/sysctl.conf 文件，由于配置了bbr拥塞算法，请确认内核版本。

#
# /etc/sysctl.conf - Configuration file for setting system variables
# See /etc/sysctl.d/ for additional system variables.
# See sysctl.conf (5) for information.
#

#kernel.domainname = example.com

# Uncomment the following to stop low-level messages on console
kernel.printk = 3 4 1 3

##############################################################3
# Functions previously found in netbase
#

# Uncomment the next two lines to enable Spoof protection (reverse-path filter)
# Turn on Source Address Verification in all interfaces to
# prevent some spoofing attacks
net.ipv4.conf.default.rp_filter=1
net.ipv4.conf.all.rp_filter=1

# Uncomment the next line to enable TCP/IP SYN cookies
# See http://lwn.net/Articles/277146/
# Note: This may impact IPv6 TCP sessions too
net.ipv4.tcp_syncookies=1

# Uncomment the next line to enable packet forwarding for IPv4
net.ipv4.ip_forward=1

# Uncomment the next line to enable packet forwarding for IPv6
#  Enabling this option disables Stateless Address Autoconfiguration
#  based on Router Advertisements for this host
#net.ipv6.conf.all.forwarding=1


###################################################################
# Additional settings - these settings can improve the network
# security of the host and prevent against some network attacks
# including spoofing attacks and man in the middle attacks through
# redirection. Some network environments, however, require that these
# settings are disabled so review and enable them as needed.
#
# Do not accept ICMP redirects (prevent MITM attacks)
net.ipv4.conf.all.accept_redirects = 0
#net.ipv6.conf.all.accept_redirects = 0
# _or_
# Accept ICMP redirects only for gateways listed in our default
# gateway list (enabled by default)
# net.ipv4.conf.all.secure_redirects = 1
#
# Do not send ICMP redirects (we are not a router)
#net.ipv4.conf.all.send_redirects = 0
#
# Do not accept IP source route packets (we are not a router)
#net.ipv4.conf.all.accept_source_route = 0
#net.ipv6.conf.all.accept_source_route = 0
#
# Log Martian Packets
#net.ipv4.conf.all.log_martians = 1
#

###################################################################
# Magic system request Key
# 0=disable, 1=enable all
# Debian kernels have this set to 0 (disable the key)
# See https://www.kernel.org/doc/Documentation/sysrq.txt
# for what other values do
#kernel.sysrq=1

###################################################################
# Protected links
#
# Protects against creating or following links under certain conditions
# Debian kernels have both set to 1 (restricted) 
# See https://www.kernel.org/doc/Documentation/sysctl/fs.txt
#fs.protected_hardlinks=0
#fs.protected_symlinks=0
vm.swappiness=60
net.ipv4.tcp_congestion_control=bbr
net.ipv4.tcp_sack = 1
net.ipv4.tcp_fack = 1
net.ipv4.tcp_frto = 2
net.ipv4.tcp_moderate_rcvbuf = 1
net.ipv4.tcp_fastopen = 3
#ADDON
net.ipv4.tcp_syn_retries = 2
net.ipv4.tcp_synack_retries = 2
net.ipv4.tcp_max_syn_backlog = 4096
net.ipv4.tcp_timestamps = 1
net.ipv4.tcp_window_scaling = 1
net.ipv4.tcp_rmem = 8192 87380 16777216
net.ipv4.udp_rmem_min = 16384
net.core.rmem_default = 262144
net.core.rmem_max = 16777216
net.ipv4.tcp_wmem = 8192 65536 16777216 
net.ipv4.udp_wmem_min = 16384 
net.core.wmem_default = 262144 
net.core.wmem_max = 16777216 
net.core.somaxconn = 32768 
net.core.netdev_max_backlog = 16384 
net.core.dev_weight = 64 
net.core.optmem_max = 65535 
net.ipv4.tcp_max_tw_buckets = 1440000 
net.ipv4.tcp_max_orphans = 16384 
net.ipv4.tcp_orphan_retries = 0
net.ipv4.ipfrag_low_thresh = 196608 
net.ipv6.ip6frag_low_thresh = 196608 
net.ipv4.ipfrag_high_thresh = 262144 
net.ipv6.ip6frag_high_thresh = 262144 
net.unix.max_dgram_qlen = 50 
net.ipv4.neigh.default.gc_thresh3 = 2048
net.ipv4.neigh.default.gc_thresh2 = 1024
net.ipv4.neigh.default.gc_thresh1 = 32
net.ipv4.neigh.default.gc_interval = 30
net.ipv4.neigh.default.proxy_qlen = 96
net.ipv4.neigh.default.unres_qlen = 6
net.ipv4.tcp_ecn = 1
net.ipv4.tcp_reordering = 3
net.ipv4.tcp_slow_start_after_idle = 0
net.ipv4.route.flush = 1
net.ipv6.route.flush = 1Code language: PHP (php)